|
| 1.Pigment Grinding
| | Yellow Base | Red Base | Blue Base | Black Base |
| Pigment1 | 37.5 | 35 | 40 | 33 |
| Soluryl-352 | 25 | 25 | 25 | 25 |
| BYK 1904 | 1 | 1.5 | 1.5 | |
| Disperse 760W2 | | | | 2 |
| AQUA 303 | 1 | 1 | 1 | 1 |
| BYK 0244 | 0.5 | 0.5 | 0.5 | 0.5 |
| Water | 35 | 37 | 32 | 38.5 |
| Total | 100 | 100 | 100 | 100 |
1) Yellow: Diarylide Yellow (PY12, 14), Red: Lithol Rubine 4B (PR 57), Blue : Phthalocyanine Blue (PB15.3), Black : Carbon Black (PB7)
2) Tego, 3) Sasol Wax, 4) BYK |
| 2.Water Based Inks for Carton Paper
| | Yellow Ink | Red Ink | Blue Ink | Black Ink
| | Pigment Base | 45 | 47 | 42 | 47
| | Soluryl R-90, R-90G, R-9061 | 45 | 45 | 45 | 45
| | ME 623301 | 4 | 4 | 4 | 4
| | Surfynol 104E2 | 0.5 | 0.5 | 0.5 | 0.5
| | BYK 0243 | 0.5 | 0.5 | 0.5 | 0.5
| | IPA | 3 | 2 | 3 | 2
| | Water | 2 | 1 | 5 | 1
| | Total | 100 | 100 | 100 | 100
| | Viscosity, #4 Zahn cup, sec | 10-15 | 10-15 | 10-15 | 10-15
|
| 1) Michelman, 2) Air Products, 3) BYK
|
3.Water Based Inks for Corrugated Kraft Paper
| | Economical | Rub Resistance
| | Pigment Base | 45 | 47
| | Soluryl E-80F, E-8040 | 45 | 35
| | Soluryl R-20, R-20B | | 10
| | Michem Lube 1261 | 2 | 2
| | Surfynol 104E2 | 0.2 | 0.5
| | Foamex 8103 | 0.3 | 0.3
| | MEA | | 0.2
| | Water | 7.5 | 5
| | Total | 100 | 100
| | Viscosity, #4 Zahn cup, sec | 10-15 | 10-15
|
| 1) Michelman, 2) Air Products, 3) TEGO
|
|
4.Water Based Inks for Al Foil and Film
| | Foil | Film
| | Pigment Base | 45 | 45
| | Soluryl RX-30 | 30 | 45
| | Soluryl R-20 | 15 |
| | Michem Lube 3681 | 2 | 2
| | Wet 2702 | 0.5 | 0.5
| | BYK 0243 | 0.4 | 0.4
| | MEA | 0.1 | 0.1
| | Water | 7 | 7
| | Total | 100 | 100
| | Viscosity, #4 Zahn cup, sec | 10-15 | 10-15
|
| 1) Michelman, 2) TEGO, 3) BYK
|
|
| 5.Water Based Over Print Varnishes : Economical Type| | Gloss | Rub Resistance | Water Resistance | Heat Resistance | Non-Skid | | Soluryl-352 | 40 | 20 | | 50 | | | Soluryl R-90,R-90G, R-9061 | 12 | 30 | | 10 | | | Soluryl R-20, R-20B | 26 | | 20 | | 50 | | Soluryl R-40 | | | 20 | | | | Soluryl RX-30 | 10 | 40 | 50 | 30 | 40 | | Michem Lube 1261 | 3 | 3 | | | | | Michem Lube 1351 | | | | 3 | | | ME 623301 | | | 3 | | | | Web 2702 | 0.5 | 0.5 | 0.5 | | 1 | | BYK 0243 | 0.5 | 0.5 | 0.5 | 0.5 | 0.5 | | Butyl Carbitol | 1 | 1 | 1 | | 1 | | DC-514 | | | | 0.2 | | | 10% Zinc Oxide Solution | | | | 2 | | | IPA | 3 | 3 | 3 | 4.3 | 4 | | Water | 4 | 2 | 2 | | 3.5 | | Total | 100 | 100 | 100 | 100 | 100 |
| 1) Michelman, 2) Air Products, 3) TEGO |
| 6.Water Based Over Print Varnishes : Special Type| (1) Rub Resistance Type | Typical | Gloss | | RX-20/RX-30 | 85 | 74 | | S-352 | 8.5 | 25 | | Surfynol 1041 | 1 | 1 | | DC-512 | 0.1 | 0.1 | | BYK 0243 | 0.5 | 0.5 | | ME 623304 | 2 | 2 | | Water | 2.9 | 10.5 | | Total | 100 | 100 | | Viscosity, #4 Zahn cup, sec : 12~15 | | |
| 1) Air Products, 2) Dow Corning, 3) BYK, 4) Mechelman |
| (2) Water Resistance Type | Typical | Zero-VOC | Fast dry | | RV-4902 | 85 | 85 | 85 | | Surfynol 1041 | 1 | 1 | 1 | | DC-512 | 0.1 | 0.1 | 0.1 | | BYK 0243 | 0.5 | 0.5 | 0.5 | | ME 623304 | 2 | 2 | 2 | | Etyle Carbitol | 1 | | | | IPA | 7.5 | | 10.5 | | Water | 2.9 | 10.5 | | | Total | 100 | 100 | 100 | | Viscosity, #4 Zahn cup, sec : 12~15 | | | |
| 1) Air Products, 2) Dow Corning, 3) BYK, 4) Mechelman |
| (3) Heat Calendering Type | Typical | Zero-VOC | Fast dry | | RV-4916 | 85 | 85 | 85 | | Surfynol 1041 | 1 | 1 | 1 | | DC-512 | 0.2 | 0.2 | 0.2 | | BYK 0243 | 0.5 | 0.5 | 0.5 | | Etyle Carbitol | 1 | | | | IPA | 9 | | 13.3 | | Water | 3.3 | 13.3 | | | Total | 100 | 100 | 100 | | Viscosity, #4 Zahn cup, sec : 10~12 | | | |
| 1) Air Products, 2) Dow Corning, 3) BYK |
| (4) Pre-Print Type | Non Zinc | Containing Zinc
| | RV-3502 | 88 | 88
| | DC-511 | 1 | 0.5
| | BYK 0242 | 0.5 | 0.5
| | Aquapolyfluo 4113 | 2 | 1
| | ZnO sol (25%) | | 5
| | Water | 8.5 | 5
| | Total | 100 | 100
| | Viscosity, #4 Zahn cup, sec : 10~12 | |
|
| 1) Dow Corning, 2) BYK, 3) MPI
|
|
The information given herein and other otherwise supplied to users is based on our general experience and where applicable, on the results of tests on samples of typeical manufacture. However, because of the many factors which are outside knowledge and control, which can effect the use of these products, users must rely on their own judgement and we cannot accept liability for any injury, loss or damaage resulting from relicance upon such information.
|
|
|
