|
|
|
| Features
| |
High gloss, clear and transparent
High solids/Low viscosity solution
Fast disssolution
Suitable for higly viscous inks
Good resolubility
|
| Typical Properties
| | Appearance | Clear Pellet | | Molecular Weight | 2,000 | | None Volatiles, wt% | >98 | | Acid Number, mgKOH/g | 232 | | Tg, °C | 90 | | Density, g/ml | 1.125 |
|
| Appplications
| | Soluryl-20 is gloss modifier inwaterbased overprint varnishes to produce a high gloss finish | | Solution Preparation and Solution Properties
| | Soluryl-20 | 40 | 45 | | Ammonia (27%) | 10 | 11 | | water | 50 | 44 | | total | 100 | 100 | | pH | 8.5 | 8.5 | | Viscositity cps (25°C,Brookfield) | 550 | 2,000 |
| | Soluryl-20 | 45 | 45 | | Ammonia (27%) | 11 | 11 | | water | 39.5 | 39.5 | | Ethyl carbitol | 4.5 | - | | Isopropyl alcohol | - | 4.5 | | total | 100 | 100 | | pH | 8.5 | 8.5 | | Viscositity cps (25°C,Brookfield) | 550 | 1,500 |
| Typical Formulations Using Soluryl-20
| Soluryl-120 is compatible with most common emulsions.| Formulation | General type | Rubresistance type | | Soluryl-20 solution | 20 | 20 | | Soluryl R-90 | 40 | 30 | | Soluryl R-20B | 30 | - | | Soluryl RX-20/RX-30 | - | 40 | | Wetting agent | 1.5 | 0.5 | | PE wax emulsion | 3 | 4 | | Defoamer | 0.5 | 0.5 | | Water/Alchol | 5 | 5 | | Total | 100 | 100 |
|
|
The information given herein and other otherwise supplied to users is based on our general experience and where applicable, on the results of tests on samples of typeical manufacture. However, because of the many factors which are outside knowledge and control, which can effect the use of these products, users must rely on their own judgement and we cannot accept liability for any injury, loss or damaage resulting from relicance upon such information.
|
|