|
|
|
| Features
| |
30% Soluryl-70 solution with MEA
Easy-to-use for water -based inks pr OPV's
Good pigment dispersion
Excellent ink transfer and printability
High gloss
Good film forming ability
Good compatibility with Solurl emulsions
|
| Typical Properties
| | Appearance | Amber solution | | Molecular Weight | 7,000 | | None Volatiles, wt% | 37.0 | | Acid Number, mgKOH/g | 218 | | Tg, °C | 120 | | Density, g/ml | 1,04 | | pH | 8.8 | | Viscosity(cps) | 600 | | Freeze/Thaw Stability | 5 cycles |
|
| Compatibility og soluryl-352
| Soluryl-352 is compatible with most common emulsions.| | Emulsion : Soluryl-352 | | Emulsion | 3:1 | 1:1 | 1:3 | | Soluryl R-90/90G | C | C | C | | Soluryl R-9061 | C | C | C | | Soluryl R-20 | C | C | C | | Soluryl R-20B | C | C | C | | Soluryl E-80F | C | C | C | | Soluryl E-8040 | C | C | C | | Soluryl RX-20/30 | C | C | C | | Soluryl SX-1420 | C | C | C |
|
| Safety Information
| | Soluryl-352 is not formulated to contain any hazardous or regulated materials such as lead, cadmium, mercury and chromium compounds. And raw materials for Soluryl-352 and our manufacturing process od not includ any hazardous or regulated materials. In addition, Soluryl-90 is complaiant with FDA regulation 21CFR 175.105, CFR 175.300, 21CFR 175.320, 21CFR 176.170, 21CFR 176.180. |
|
|
The information given herein and other otherwise supplied to users is based on our general experience and where applicable, on the results of tests on samples of typeical manufacture. However, because of the many factors which are outside knowledge and control, which can effect the use of these products, users must rely on their own judgement and we cannot accept liability for any injury, loss or damaage resulting from relicance upon such information.
|
|