|
|
|
| Features
| |
Let-down vehicle for flex flexographic inks
Good hiding power
Fast drying
Good ink transfer and printability
Good compatibility with Soluryl solid resins and emulsions
Suitable for the corrugated paper or paperboard
|
| Typical Properties
| | Appearance | Translucent emulsion | | Molecular Weight | 16,500 | | None Volatiles, wt% | 39.0 | | Acid Number, mgKOH/g | 235 | | Tg, °C | 80 | | Density, g/ml | 1.03 | | pH | 8.5 | | Viscosity(cps) | 1,000 | | Freeze/Thaw Stability | 5 cycles |
|
| Compatibility og soluryl-802
| Soluryl-802 is compatible with most common emulsions.| | Emulsion : Soluryl-802 | | Emulsion | 3:1 | 1:1 | 1:3 | | Soluryl R-90/90G | C | C | C | | Soluryl R-9061 | C | C | C | | Soluryl R-20 | C | C | C | | Soluryl R-20B | C | C | C | | Soluryl E-80F | C | C | C | | Soluryl E-8040 | C | C | C | | Soluryl RX-20/30 | C | C | C | | Soluryl SX-1420 | C | C | C |
|
| Safety Information
| | Soluryl-802 is not formulated to contain any hazardous or regulated materials such as lead, cadmium, mercury and chromium compounds. And raw materials for Soluryl-802 and our manufacturing process do not includ any hazardous or regulated materials. |
|
|
The information given herein and other otherwise supplied to users is based on our general experience and where applicable, on the results of tests on samples of typeical manufacture. However, because of the many factors which are outside knowledge and control, which can effect the use of these products, users must rely on their own judgement and we cannot accept liability for any injury, loss or damaage resulting from relicance upon such information.
|
|