|
|
|
| Features
| |
Let-Down vehicle for flexographic inks
Good hiding power
Fast drying
Good ink transfer and printability
Good compatibility with Solurl solid resins and emulsions
Suitable for the corrugated paper or paperboard
|
| Typical Properties
| | Appearance | Translucent emulsion | | Molecular Weight | >200,000 | | None Volatiles, wt% | 48.5 | | Acid Number, mgKOH/g | 24 | | Tg, °C | 85 | | Density, g/ml | 1.04 | | pH | 8.8 | | Viscosity(cps) | 2,200 | | Freeze/Thaw Stability | 5 cycles |
|
| Compatibility of soluryl E-80F
| Soluryl E-80F is compatible eith most common solid resins and emulsions.| | Emulsion : Soluryl E-80F | | Emulsion | 3:1 | 1:1 | 1:3 | | Soluryl-351/352 | C | C | C | | Soluryl R-20 | C | C | C | | Soluryl R-20B | C | C | C | | Soluryl R-90/90G | C | C | C | | Soluryl R-9061 | C | C | C | | Soluryl RX-20/30 | C | C | C | | Soluryl SX-1420 | C | C | C |
|
| Dilution Characteristics
| | Soluryl R-90G can be diluted with water/alcohol blends.It is advisable to pre-mix solvents before adding to the polymer to avoid any possible solvent shock. |
| Pigmentation
| | Soluryl E-80F is compatible with most organic and inorganic pigments use in water-based inks.As with all water-base carboxylated acrylic polymers, care must be taken with barium and calcium based organic red pigments as certain types can cause tickening. The best results are obtained by dispersing the pigments into Soluryl-70 and letting down with Solury E-80F. |
| Safety Information
| | Soluryl E-80F is not formulated to contain any hazardous or regulated materials such as lead, cadmium, mercury and chromium compounds. And raw materials for Soluryl E-80F and our manufacturing process do not includ any hazardous or regulated materials. |
|
|
The information given herein and other otherwise supplied to users is based on our general experience and where applicable, on the results of tests on samples of typeical manufacture. However, because of the many factors which are outside knowledge and control, which can effect the use of these products, users must rely on their own judgement and we cannot accept liability for any injury, loss or damaage resulting from relicance upon such information.
|
|