|
|
|
| Features
| |
High gloss, clear and transparent
Excellent rub resistance
Good water resistance
Excellent tranfer and printability
Good compatibility with Solurl solid resins and emulsions
Newtonian-like flow behavior
|
| Typical Properties
| | Appearance | Translucent emulsion | | Total Solids, wt% | 48.5 | | Volatile | Water | | Neutralizing agent | Ammonia | | Molecular Weight | >200,000 | | Acid Number, mgKOH/g | 25 | | Tg, °C | 12 | | Viscosity(cps) | 2,000 | | Density, g/ml | 1.04 | | pH,25, °C | 8.8 | | Freeze/Thaw Stability | 5 cycles |
|
| Compatibility of soluryl RX-20
| | Soluryl RX-20 emulsion is compatible with a wide range of other acrylics. Dilution with glycols, glycol ether and alcohols is excellent. Solury RX-20 can be diluted with water/alcohol blends. It is advisable to pre-mix solvents before adding to the polymer to avoid any possible solvent shock. |
| Recommendation for end-use
| | Overprint varnishes for rub resistance and anti-slip coatingPaper coating and Let down vehicle for excellent gloss and rub resistance| Let down vehicle for good adhesion for Al foil | | |
| Safety Information
| | Soluryl RX-20 is not formulated to contain any hazardous or regulated materials such as lead, cadmium, mercury and chromium compounds. And raw materials for Soluryl RX-20 and our manufacturing process do not includ any hazardous or regulated materials. |
|
|
The information given herein and other otherwise supplied to users is based on our general experience and where applicable, on the results of tests on samples of typeical manufacture. However, because of the many factors which are outside knowledge and control, which can effect the use of these products, users must rely on their own judgement and we cannot accept liability for any injury, loss or damaage resulting from relicance upon such information.
|
|