|
|
|
| Features
| |
High gloss, clear and transparent
Good adhesion
Good water resistance
Good compatibility with Solurl solid resins and emulsions
Newtonian-like flow behavior
|
| Typical Properties
| | Appearance | Translucent emulsion | | Total Solids, wt% | 46.0 | | Volatile | Water | | Neutralizing agent | Ammonia | | Molecular Weight | >200,000 | | Acid Number, mgKOH/g | 25 | | Tg, °C | -40 | | Viscosity(cps) | 300 | | Density, g/ml | 1.05 | | pH,25, °C | 8.7 | | Freeze/Thaw Stability | 5 cycles |
|
| Compatibility of soluryl SX-1420
| | Soluryl SX-1420 emulsion is compatible with a wide range of other acrylics. Dilution with glycols, glycol ether and alcohols is excellent. Solury SX-1420 can be diluted with water/alcohol blends. It is advisable to pre-mix solvents before adding to the polymer to avoid any possible solvent shock. |
| Recommendation for end-use
| | Improving agent for good adhesionPaper coating and Let down vehicle for excellent gloss| Paper coating and Let down vehicle for film, plastics and Al foil | | |
| Safety Information
| | Soluryl SX-1420 is not formulated to contain any hazardous or regulated materials such as lead, cadmium, mercury and chromium compounds. And raw materials for Soluryl SX-1420 and our manufacturing process do not includ any hazardous or regulated materials. |
|
|
The information given herein and other otherwise supplied to users is based on our general experience and where applicable, on the results of tests on samples of typeical manufacture. However, because of the many factors which are outside knowledge and control, which can effect the use of these products, users must rely on their own judgement and we cannot accept liability for any injury, loss or damaage resulting from relicance upon such information.
|
|